Sell Solar Panels

Detailed Selling Lead Description Features:
1) Double-junction amorphous silicon solar module under standard test
condition 9STC
2) Rated power of our amorphous silicon solar module: 32W, 34W, 36W, 38W,
40W
3) Min. size: 30 x 30 x 3mm
4) Parameters of double-junction amorphous silicon solar module under
standard test condition (STC):
a) Type 32 (42)H/G: 32±1Pmp (W), 57Voc (V), 1.0Isc (A), 42Vmp (V),
643 x 1,253 x 370mm, 12.5kg
b) 34(43)H/G: 34±1Pmp (W), 58Voc (V), 1.0Isc (A), 43Vmp (V),
643 x 1,253 x 370mm, 12.5kg
c) 36(44)H/G: 36±1Pmp (W), 59Voc (V), 1.0Isc (A), 44Vmp (V),
643 x 1,253 x 370mm, 12.5kg
d) 38(45)H/G: 38±1Pmp (W), 60Voc (V), 1.0Isc (A), 45Vmp (V),
643 x 1,253 x 370mm, 12.5kg
e) 40(46)H/G: 40±1Pmp (W), 61Voc (V), 1.0Isc (A), 46Vmp (V),
643 x 1,253 x 370mm, 12.5kg
5) Other technical parameters:
a) System voltage: 600V
b) Test condition: AM 1.5,100mW/cm², 25^oC
c) Temperatures: -40 to +55^oC
d) Temperature coefficient:
i) Power: -0.19%/^oC
ii) Voc: -0.28%/^oC
iii) Isc: +0.09%/^oC
6) Note: actual output power just after manufacturing is 15% - 20% higher
than the rated power, meanwhile, Vmp and Imp are higher than the rated
data. These factors as well as the maximum power under highest irradiation
should be considered when you design and configure the solar system
7) Basic configuration and special features of double-junction A-SI solar
module: the module encapsulation includes edge isolation and the other
eight procedures, which ensure the active film of the cell is isolated from
outside. Because EVA films are at the back of the module, sunlight cannot
directly touch EVA, which makes aging process of the EVA be effectively
postponed. Furthermore, double-glasses encapsulation prolongs solar
module's lifetime. In addition, strict MESNE test procedures guarantee the
product's reliability. It has proved that, obviously, in same power and same
environment, A-SI solar module generates more electricity than other kinds
of crystalline silicon solar modules
8) Advantages of A-SI module: because of its special spectral characteristic,
A-SI module has better conversion efficiency in the low irradiation. In addition,
A-SI module has good performance at high temperature, which increases
the electricity generating ability. In other words, when a consumer purchases
three kinds of solar modules in the same watts, he will get the most power
from the A-SI module